{{ "language": "Solidity", "sources": { "contracts/BlurToken.sol": { "content": "// SPDX-License-Identifier: MIT\npragma solidity ^0.8.17;\n\nimport \"@openzeppelin/contracts/access/Ownable.sol\";\nimport \"@openzeppelin/contracts/token/ERC20/extensions/ERC20Votes.sol\";\nimport \"@openzeppelin/contracts/token/ERC20/ERC20.sol\";\nimport \"@openzeppelin/contracts/token/ERC20/extensions/draft-ERC20Permit.sol\";\n\nimport \"./interfaces/ITokenLockup.sol\";\n\ncontract BlurToken is ERC20Votes, Ownable {\n\n uint256 private constant INITIAL_SUPPLY = 3_000_000_000;\n\n address[] public lockups;\n\n constructor() ERC20Permit(\"Blur\") ERC20(\"Blur\", \"BLUR\") {\n _mint(msg.sender, INITIAL_SUPPLY * 10 ** 18);\n }\n\n /**\n * @notice Adds token lockup addresses\n * @param _lockups Lockup addresses to add\n */\n function addLockups(address[] calldata _lockups) external onlyOwner {\n require(lockups.length == 0);\n uint256 lockupsLength = _lockups.length;\n for (uint256 i = 0; i < lockupsLength; i++) {\n require(ITokenLockup(_lockups[i]).token() == address(this));\n lockups.push(_lockups[i]);\n }\n }\n\n /**\n * @notice Adds token lockup balance to ERC20Votes.getVotes value\n * @param account Address to get vote total of\n */\n function getVotes(address account) public view override returns (uint256) {\n return ERC20Votes.getVotes(account) + _getTokenLockupBalance(account);\n }\n\n /**\n * @notice Adds token lockup balance to ERC20Votes.getPastVotes value\n * @param account Address to get past vote total of\n */\n function getPastVotes(address account, uint256 blockNumber) public view override returns (uint256) {\n return ERC20Votes.getPastVotes(account, blockNumber) + _getTokenLockupBalance(account);\n }\n\n /**\n * @notice Calculates the balance that is allocated to the account across the token lockups\n * @param account Address to get locked balance of\n */\n function _getTokenLockupBalance(address account) internal view returns (uint256) {\n uint256 balance;\n uint256 lockupsLength = lockups.length;\n for (uint256 i; i < lockupsLength; i++) {\n balance += ITokenLockup(lockups[i]).balanceOf(account);\n }\n return balance;\n }\n}\n" }, "@openzeppelin/contracts/access/Ownable.sol": { "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)\n\npragma solidity ^0.8.0;\n\nimport \"../utils/Context.sol\";\n\n/**\n * @dev Contract module which provides a basic access control mechanism, where\n * there is an account (an owner) that can be granted exclusive access to\n * specific functions.\n *\n * By default, the owner account will be the one that deploys the contract. This\n * can later be changed with {transferOwnership}.\n *\n * This module is used through inheritance. It will make available the modifier\n * `onlyOwner`, which can be applied to your functions to restrict their use to\n * the owner.\n */\nabstract contract Ownable is Context {\n address private _owner;\n\n event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);\n\n /**\n * @dev Initializes the contract setting the deployer as the initial owner.\n */\n constructor() {\n _transferOwnership(_msgSender());\n }\n\n /**\n * @dev Throws if called by any account other than the owner.\n */\n modifier onlyOwner() {\n _checkOwner();\n _;\n }\n\n /**\n * @dev Returns the address of the current owner.\n */\n function owner() public view virtual returns (address) {\n return _owner;\n }\n\n /**\n * @dev Throws if the sender is not the owner.\n */\n function _checkOwner() internal view virtual {\n require(owner() == _msgSender(), \"Ownable: caller is not the owner\");\n }\n\n /**\n * @dev Leaves the contract without owner. It will not be possible to call\n * `onlyOwner` functions anymore. Can only be called by the current owner.\n *\n * NOTE: Renouncing ownership will leave the contract without an owner,\n * thereby removing any functionality that is only available to the owner.\n */\n function renounceOwnership() public virtual onlyOwner {\n _transferOwnership(address(0));\n }\n\n /**\n * @dev Transfers ownership of the contract to a new account (`newOwner`).\n * Can only be called by the current owner.\n */\n function transferOwnership(address newOwner) public virtual onlyOwner {\n require(newOwner != address(0), \"Ownable: new owner is the zero address\");\n _transferOwnership(newOwner);\n }\n\n /**\n * @dev Transfers ownership of the contract to a new account (`newOwner`).\n * Internal function without access restriction.\n */\n function _transferOwnership(address newOwner) internal virtual {\n address oldOwner = _owner;\n _owner = newOwner;\n emit OwnershipTransferred(oldOwner, newOwner);\n }\n}\n" }, "@openzeppelin/contracts/token/ERC20/extensions/ERC20Votes.sol": { "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC20/extensions/ERC20Votes.sol)\n\npragma solidity ^0.8.0;\n\nimport \"./draft-ERC20Permit.sol\";\nimport \"../../../utils/math/Math.sol\";\nimport \"../../../governance/utils/IVotes.sol\";\nimport \"../../../utils/math/SafeCast.sol\";\nimport \"../../../utils/cryptography/ECDSA.sol\";\n\n/**\n * @dev Extension of ERC20 to support Compound-like voting and delegation. This version is more generic than Compound's,\n * and supports token supply up to 2^224^ - 1, while COMP is limited to 2^96^ - 1.\n *\n * NOTE: If exact COMP compatibility is required, use the {ERC20VotesComp} variant of this module.\n *\n * This extension keeps a history (checkpoints) of each account's vote power. Vote power can be delegated either\n * by calling the {delegate} function directly, or by providing a signature to be used with {delegateBySig}. Voting\n * power can be queried through the public accessors {getVotes} and {getPastVotes}.\n *\n * By default, token balance does not account for voting power. This makes transfers cheaper. The downside is that it\n * requires users to delegate to themselves in order to activate checkpoints and have their voting power tracked.\n *\n * _Available since v4.2._\n */\nabstract contract ERC20Votes is IVotes, ERC20Permit {\n struct Checkpoint {\n uint32 fromBlock;\n uint224 votes;\n }\n\n bytes32 private constant _DELEGATION_TYPEHASH =\n keccak256(\"Delegation(address delegatee,uint256 nonce,uint256 expiry)\");\n\n mapping(address => address) private _delegates;\n mapping(address => Checkpoint[]) private _checkpoints;\n Checkpoint[] private _totalSupplyCheckpoints;\n\n /**\n * @dev Get the `pos`-th checkpoint for `account`.\n */\n function checkpoints(address account, uint32 pos) public view virtual returns (Checkpoint memory) {\n return _checkpoints[account][pos];\n }\n\n /**\n * @dev Get number of checkpoints for `account`.\n */\n function numCheckpoints(address account) public view virtual returns (uint32) {\n return SafeCast.toUint32(_checkpoints[account].length);\n }\n\n /**\n * @dev Get the address `account` is currently delegating to.\n */\n function delegates(address account) public view virtual override returns (address) {\n return _delegates[account];\n }\n\n /**\n * @dev Gets the current votes balance for `account`\n */\n function getVotes(address account) public view virtual override returns (uint256) {\n uint256 pos = _checkpoints[account].length;\n return pos == 0 ? 0 : _checkpoints[account][pos - 1].votes;\n }\n\n /**\n * @dev Retrieve the number of votes for `account` at the end of `blockNumber`.\n *\n * Requirements:\n *\n * - `blockNumber` must have been already mined\n */\n function getPastVotes(address account, uint256 blockNumber) public view virtual override returns (uint256) {\n require(blockNumber < block.number, \"ERC20Votes: block not yet mined\");\n return _checkpointsLookup(_checkpoints[account], blockNumber);\n }\n\n /**\n * @dev Retrieve the `totalSupply` at the end of `blockNumber`. Note, this value is the sum of all balances.\n * It is but NOT the sum of all the delegated votes!\n *\n * Requirements:\n *\n * - `blockNumber` must have been already mined\n */\n function getPastTotalSupply(uint256 blockNumber) public view virtual override returns (uint256) {\n require(blockNumber < block.number, \"ERC20Votes: block not yet mined\");\n return _checkpointsLookup(_totalSupplyCheckpoints, blockNumber);\n }\n\n /**\n * @dev Lookup a value in a list of (sorted) checkpoints.\n */\n function _checkpointsLookup(Checkpoint[] storage ckpts, uint256 blockNumber) private view returns (uint256) {\n // We run a binary search to look for the earliest checkpoint taken after `blockNumber`.\n //\n // Initially we check if the block is recent to narrow the search range.\n // During the loop, the index of the wanted checkpoint remains in the range [low-1, high).\n // With each iteration, either `low` or `high` is moved towards the middle of the range to maintain the invariant.\n // - If the middle checkpoint is after `blockNumber`, we look in [low, mid)\n // - If the middle checkpoint is before or equal to `blockNumber`, we look in [mid+1, high)\n // Once we reach a single value (when low == high), we've found the right checkpoint at the index high-1, if not\n // out of bounds (in which case we're looking too far in the past and the result is 0).\n // Note that if the latest checkpoint available is exactly for `blockNumber`, we end up with an index that is\n // past the end of the array, so we technically don't find a checkpoint after `blockNumber`, but it works out\n // the same.\n uint256 length = ckpts.length;\n\n uint256 low = 0;\n uint256 high = length;\n\n if (length > 5) {\n uint256 mid = length - Math.sqrt(length);\n if (_unsafeAccess(ckpts, mid).fromBlock > blockNumber) {\n high = mid;\n } else {\n low = mid + 1;\n }\n }\n\n while (low < high) {\n uint256 mid = Math.average(low, high);\n if (_unsafeAccess(ckpts, mid).fromBlock > blockNumber) {\n high = mid;\n } else {\n low = mid + 1;\n }\n }\n\n return high == 0 ? 0 : _unsafeAccess(ckpts, high - 1).votes;\n }\n\n /**\n * @dev Delegate votes from the sender to `delegatee`.\n */\n function delegate(address delegatee) public virtual override {\n _delegate(_msgSender(), delegatee);\n }\n\n /**\n * @dev Delegates votes from signer to `delegatee`\n */\n function delegateBySig(\n address delegatee,\n uint256 nonce,\n uint256 expiry,\n uint8 v,\n bytes32 r,\n bytes32 s\n ) public virtual override {\n require(block.timestamp <= expiry, \"ERC20Votes: signature expired\");\n address signer = ECDSA.recover(\n _hashTypedDataV4(keccak256(abi.encode(_DELEGATION_TYPEHASH, delegatee, nonce, expiry))),\n v,\n r,\n s\n );\n require(nonce == _useNonce(signer), \"ERC20Votes: invalid nonce\");\n _delegate(signer, delegatee);\n }\n\n /**\n * @dev Maximum token supply. Defaults to `type(uint224).max` (2^224^ - 1).\n */\n function _maxSupply() internal view virtual returns (uint224) {\n return type(uint224).max;\n }\n\n /**\n * @dev Snapshots the totalSupply after it has been increased.\n */\n function _mint(address account, uint256 amount) internal virtual override {\n super._mint(account, amount);\n require(totalSupply() <= _maxSupply(), \"ERC20Votes: total supply risks overflowing votes\");\n\n _writeCheckpoint(_totalSupplyCheckpoints, _add, amount);\n }\n\n /**\n * @dev Snapshots the totalSupply after it has been decreased.\n */\n function _burn(address account, uint256 amount) internal virtual override {\n super._burn(account, amount);\n\n _writeCheckpoint(_totalSupplyCheckpoints, _subtract, amount);\n }\n\n /**\n * @dev Move voting power when tokens are transferred.\n *\n * Emits a {IVotes-DelegateVotesChanged} event.\n */\n function _afterTokenTransfer(\n address from,\n address to,\n uint256 amount\n ) internal virtual override {\n super._afterTokenTransfer(from, to, amount);\n\n _moveVotingPower(delegates(from), delegates(to), amount);\n }\n\n /**\n * @dev Change delegation for `delegator` to `delegatee`.\n *\n * Emits events {IVotes-DelegateChanged} and {IVotes-DelegateVotesChanged}.\n */\n function _delegate(address delegator, address delegatee) internal virtual {\n address currentDelegate = delegates(delegator);\n uint256 delegatorBalance = balanceOf(delegator);\n _delegates[delegator] = delegatee;\n\n emit DelegateChanged(delegator, currentDelegate, delegatee);\n\n _moveVotingPower(currentDelegate, delegatee, delegatorBalance);\n }\n\n function _moveVotingPower(\n address src,\n address dst,\n uint256 amount\n ) private {\n if (src != dst && amount > 0) {\n if (src != address(0)) {\n (uint256 oldWeight, uint256 newWeight) = _writeCheckpoint(_checkpoints[src], _subtract, amount);\n emit DelegateVotesChanged(src, oldWeight, newWeight);\n }\n\n if (dst != address(0)) {\n (uint256 oldWeight, uint256 newWeight) = _writeCheckpoint(_checkpoints[dst], _add, amount);\n emit DelegateVotesChanged(dst, oldWeight, newWeight);\n }\n }\n }\n\n function _writeCheckpoint(\n Checkpoint[] storage ckpts,\n function(uint256, uint256) view returns (uint256) op,\n uint256 delta\n ) private returns (uint256 oldWeight, uint256 newWeight) {\n uint256 pos = ckpts.length;\n\n Checkpoint memory oldCkpt = pos == 0 ? Checkpoint(0, 0) : _unsafeAccess(ckpts, pos - 1);\n\n oldWeight = oldCkpt.votes;\n newWeight = op(oldWeight, delta);\n\n if (pos > 0 && oldCkpt.fromBlock == block.number) {\n _unsafeAccess(ckpts, pos - 1).votes = SafeCast.toUint224(newWeight);\n } else {\n ckpts.push(Checkpoint({fromBlock: SafeCast.toUint32(block.number), votes: SafeCast.toUint224(newWeight)}));\n }\n }\n\n function _add(uint256 a, uint256 b) private pure returns (uint256) {\n return a + b;\n }\n\n function _subtract(uint256 a, uint256 b) private pure returns (uint256) {\n return a - b;\n }\n\n function _unsafeAccess(Checkpoint[] storage ckpts, uint256 pos) private pure returns (Checkpoint storage result) {\n assembly {\n mstore(0, ckpts.slot)\n result.slot := add(keccak256(0, 0x20), pos)\n }\n }\n}\n" }, "@openzeppelin/contracts/token/ERC20/ERC20.sol": { "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC20/ERC20.sol)\n\npragma solidity ^0.8.0;\n\nimport \"./IERC20.sol\";\nimport \"./extensions/IERC20Metadata.sol\";\nimport \"../../utils/Context.sol\";\n\n/**\n * @dev Implementation of the {IERC20} interface.\n *\n * This implementation is agnostic to the way tokens are created. This means\n * that a supply mechanism has to be added in a derived contract using {_mint}.\n * For a generic mechanism see {ERC20PresetMinterPauser}.\n *\n * TIP: For a detailed writeup see our guide\n * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How\n * to implement supply mechanisms].\n *\n * We have followed general OpenZeppelin Contracts guidelines: functions revert\n * instead returning `false` on failure. This behavior is nonetheless\n * conventional and does not conflict with the expectations of ERC20\n * applications.\n *\n * Additionally, an {Approval} event is emitted on calls to {transferFrom}.\n * This allows applications to reconstruct the allowance for all accounts just\n * by listening to said events. Other implementations of the EIP may not emit\n * these events, as it isn't required by the specification.\n *\n * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}\n * functions have been added to mitigate the well-known issues around setting\n * allowances. See {IERC20-approve}.\n */\ncontract ERC20 is Context, IERC20, IERC20Metadata {\n mapping(address => uint256) private _balances;\n\n mapping(address => mapping(address => uint256)) private _allowances;\n\n uint256 private _totalSupply;\n\n string private _name;\n string private _symbol;\n\n /**\n * @dev Sets the values for {name} and {symbol}.\n *\n * The default value of {decimals} is 18. To select a different value for\n * {decimals} you should overload it.\n *\n * All two of these values are immutable: they can only be set once during\n * construction.\n */\n constructor(string memory name_, string memory symbol_) {\n _name = name_;\n _symbol = symbol_;\n }\n\n /**\n * @dev Returns the name of the token.\n */\n function name() public view virtual override returns (string memory) {\n return _name;\n }\n\n /**\n * @dev Returns the symbol of the token, usually a shorter version of the\n * name.\n */\n function symbol() public view virtual override returns (string memory) {\n return _symbol;\n }\n\n /**\n * @dev Returns the number of decimals used to get its user representation.\n * For example, if `decimals` equals `2`, a balance of `505` tokens should\n * be displayed to a user as `5.05` (`505 / 10 ** 2`).\n *\n * Tokens usually opt for a value of 18, imitating the relationship between\n * Ether and Wei. This is the value {ERC20} uses, unless this function is\n * overridden;\n *\n * NOTE: This information is only used for _display_ purposes: it in\n * no way affects any of the arithmetic of the contract, including\n * {IERC20-balanceOf} and {IERC20-transfer}.\n */\n function decimals() public view virtual override returns (uint8) {\n return 18;\n }\n\n /**\n * @dev See {IERC20-totalSupply}.\n */\n function totalSupply() public view virtual override returns (uint256) {\n return _totalSupply;\n }\n\n /**\n * @dev See {IERC20-balanceOf}.\n */\n function balanceOf(address account) public view virtual override returns (uint256) {\n return _balances[account];\n }\n\n /**\n * @dev See {IERC20-transfer}.\n *\n * Requirements:\n *\n * - `to` cannot be the zero address.\n * - the caller must have a balance of at least `amount`.\n */\n function transfer(address to, uint256 amount) public virtual override returns (bool) {\n address owner = _msgSender();\n _transfer(owner, to, amount);\n return true;\n }\n\n /**\n * @dev See {IERC20-allowance}.\n */\n function allowance(address owner, address spender) public view virtual override returns (uint256) {\n return _allowances[owner][spender];\n }\n\n /**\n * @dev See {IERC20-approve}.\n *\n * NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on\n * `transferFrom`. This is semantically equivalent to an infinite approval.\n *\n * Requirements:\n *\n * - `spender` cannot be the zero address.\n */\n function approve(address spender, uint256 amount) public virtual override returns (bool) {\n address owner = _msgSender();\n _approve(owner, spender, amount);\n return true;\n }\n\n /**\n * @dev See {IERC20-transferFrom}.\n *\n * Emits an {Approval} event indicating the updated allowance. This is not\n * required by the EIP. See the note at the beginning of {ERC20}.\n *\n * NOTE: Does not update the allowance if the current allowance\n * is the maximum `uint256`.\n *\n * Requirements:\n *\n * - `from` and `to` cannot be the zero address.\n * - `from` must have a balance of at least `amount`.\n * - the caller must have allowance for ``from``'s tokens of at least\n * `amount`.\n */\n function transferFrom(\n address from,\n address to,\n uint256 amount\n ) public virtual override returns (bool) {\n address spender = _msgSender();\n _spendAllowance(from, spender, amount);\n _transfer(from, to, amount);\n return true;\n }\n\n /**\n * @dev Atomically increases the allowance granted to `spender` by the caller.\n *\n * This is an alternative to {approve} that can be used as a mitigation for\n * problems described in {IERC20-approve}.\n *\n * Emits an {Approval} event indicating the updated allowance.\n *\n * Requirements:\n *\n * - `spender` cannot be the zero address.\n */\n function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {\n address owner = _msgSender();\n _approve(owner, spender, allowance(owner, spender) + addedValue);\n return true;\n }\n\n /**\n * @dev Atomically decreases the allowance granted to `spender` by the caller.\n *\n * This is an alternative to {approve} that can be used as a mitigation for\n * problems described in {IERC20-approve}.\n *\n * Emits an {Approval} event indicating the updated allowance.\n *\n * Requirements:\n *\n * - `spender` cannot be the zero address.\n * - `spender` must have allowance for the caller of at least\n * `subtractedValue`.\n */\n function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {\n address owner = _msgSender();\n uint256 currentAllowance = allowance(owner, spender);\n require(currentAllowance >= subtractedValue, \"ERC20: decreased allowance below zero\");\n unchecked {\n _approve(owner, spender, currentAllowance - subtractedValue);\n }\n\n return true;\n }\n\n /**\n * @dev Moves `amount` of tokens from `from` to `to`.\n *\n * This internal function is equivalent to {transfer}, and can be used to\n * e.g. implement automatic token fees, slashing mechanisms, etc.\n *\n * Emits a {Transfer} event.\n *\n * Requirements:\n *\n * - `from` cannot be the zero address.\n * - `to` cannot be the zero address.\n * - `from` must have a balance of at least `amount`.\n */\n function _transfer(\n address from,\n address to,\n uint256 amount\n ) internal virtual {\n require(from != address(0), \"ERC20: transfer from the zero address\");\n require(to != address(0), \"ERC20: transfer to the zero address\");\n\n _beforeTokenTransfer(from, to, amount);\n\n uint256 fromBalance = _balances[from];\n require(fromBalance >= amount, \"ERC20: transfer amount exceeds balance\");\n unchecked {\n _balances[from] = fromBalance - amount;\n // Overflow not possible: the sum of all balances is capped by totalSupply, and the sum is preserved by\n // decrementing then incrementing.\n _balances[to] += amount;\n }\n\n emit Transfer(from, to, amount);\n\n _afterTokenTransfer(from, to, amount);\n }\n\n /** @dev Creates `amount` tokens and assigns them to `account`, increasing\n * the total supply.\n *\n * Emits a {Transfer} event with `from` set to the zero address.\n *\n * Requirements:\n *\n * - `account` cannot be the zero address.\n */\n function _mint(address account, uint256 amount) internal virtual {\n require(account != address(0), \"ERC20: mint to the zero address\");\n\n _beforeTokenTransfer(address(0), account, amount);\n\n _totalSupply += amount;\n unchecked {\n // Overflow not possible: balance + amount is at most totalSupply + amount, which is checked above.\n _balances[account] += amount;\n }\n emit Transfer(address(0), account, amount);\n\n _afterTokenTransfer(address(0), account, amount);\n }\n\n /**\n * @dev Destroys `amount` tokens from `account`, reducing the\n * total supply.\n *\n * Emits a {Transfer} event with `to` set to the zero address.\n *\n * Requirements:\n *\n * - `account` cannot be the zero address.\n * - `account` must have at least `amount` tokens.\n */\n function _burn(address account, uint256 amount) internal virtual {\n require(account != address(0), \"ERC20: burn from the zero address\");\n\n _beforeTokenTransfer(account, address(0), amount);\n\n uint256 accountBalance = _balances[account];\n require(accountBalance >= amount, \"ERC20: burn amount exceeds balance\");\n unchecked {\n _balances[account] = accountBalance - amount;\n // Overflow not possible: amount <= accountBalance <= totalSupply.\n _totalSupply -= amount;\n }\n\n emit Transfer(account, address(0), amount);\n\n _afterTokenTransfer(account, address(0), amount);\n }\n\n /**\n * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.\n *\n * This internal function is equivalent to `approve`, and can be used to\n * e.g. set automatic allowances for certain subsystems, etc.\n *\n * Emits an {Approval} event.\n *\n * Requirements:\n *\n * - `owner` cannot be the zero address.\n * - `spender` cannot be the zero address.\n */\n function _approve(\n address owner,\n address spender,\n uint256 amount\n ) internal virtual {\n require(owner != address(0), \"ERC20: approve from the zero address\");\n require(spender != address(0), \"ERC20: approve to the zero address\");\n\n _allowances[owner][spender] = amount;\n emit Approval(owner, spender, amount);\n }\n\n /**\n * @dev Updates `owner` s allowance for `spender` based on spent `amount`.\n *\n * Does not update the allowance amount in case of infinite allowance.\n * Revert if not enough allowance is available.\n *\n * Might emit an {Approval} event.\n */\n function _spendAllowance(\n address owner,\n address spender,\n uint256 amount\n ) internal virtual {\n uint256 currentAllowance = allowance(owner, spender);\n if (currentAllowance != type(uint256).max) {\n require(currentAllowance >= amount, \"ERC20: insufficient allowance\");\n unchecked {\n _approve(owner, spender, currentAllowance - amount);\n }\n }\n }\n\n /**\n * @dev Hook that is called before any transfer of tokens. This includes\n * minting and burning.\n *\n * Calling conditions:\n *\n * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens\n * will be transferred to `to`.\n * - when `from` is zero, `amount` tokens will be minted for `to`.\n * - when `to` is zero, `amount` of ``from``'s tokens will be burned.\n * - `from` and `to` are never both zero.\n *\n * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].\n */\n function _beforeTokenTransfer(\n address from,\n address to,\n uint256 amount\n ) internal virtual {}\n\n /**\n * @dev Hook that is called after any transfer of tokens. This includes\n * minting and burning.\n *\n * Calling conditions:\n *\n * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens\n * has been transferred to `to`.\n * - when `from` is zero, `amount` tokens have been minted for `to`.\n * - when `to` is zero, `amount` of ``from``'s tokens have been burned.\n * - `from` and `to` are never both zero.\n *\n * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].\n */\n function _afterTokenTransfer(\n address from,\n address to,\n uint256 amount\n ) internal virtual {}\n}\n" }, "@openzeppelin/contracts/token/ERC20/extensions/draft-ERC20Permit.sol": { "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC20/extensions/draft-ERC20Permit.sol)\n\npragma solidity ^0.8.0;\n\nimport \"./draft-IERC20Permit.sol\";\nimport \"../ERC20.sol\";\nimport \"../../../utils/cryptography/ECDSA.sol\";\nimport \"../../../utils/cryptography/EIP712.sol\";\nimport \"../../../utils/Counters.sol\";\n\n/**\n * @dev Implementation of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in\n * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].\n *\n * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by\n * presenting a message signed by the account. By not relying on `{IERC20-approve}`, the token holder account doesn't\n * need to send a transaction, and thus is not required to hold Ether at all.\n *\n * _Available since v3.4._\n */\nabstract contract ERC20Permit is ERC20, IERC20Permit, EIP712 {\n using Counters for Counters.Counter;\n\n mapping(address => Counters.Counter) private _nonces;\n\n // solhint-disable-next-line var-name-mixedcase\n bytes32 private constant _PERMIT_TYPEHASH =\n keccak256(\"Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)\");\n /**\n * @dev In previous versions `_PERMIT_TYPEHASH` was declared as `immutable`.\n * However, to ensure consistency with the upgradeable transpiler, we will continue\n * to reserve a slot.\n * @custom:oz-renamed-from _PERMIT_TYPEHASH\n */\n // solhint-disable-next-line var-name-mixedcase\n bytes32 private _PERMIT_TYPEHASH_DEPRECATED_SLOT;\n\n /**\n * @dev Initializes the {EIP712} domain separator using the `name` parameter, and setting `version` to `\"1\"`.\n *\n * It's a good idea to use the same `name` that is defined as the ERC20 token name.\n */\n constructor(string memory name) EIP712(name, \"1\") {}\n\n /**\n * @dev See {IERC20Permit-permit}.\n */\n function permit(\n address owner,\n address spender,\n uint256 value,\n uint256 deadline,\n uint8 v,\n bytes32 r,\n bytes32 s\n ) public virtual override {\n require(block.timestamp <= deadline, \"ERC20Permit: expired deadline\");\n\n bytes32 structHash = keccak256(abi.encode(_PERMIT_TYPEHASH, owner, spender, value, _useNonce(owner), deadline));\n\n bytes32 hash = _hashTypedDataV4(structHash);\n\n address signer = ECDSA.recover(hash, v, r, s);\n require(signer == owner, \"ERC20Permit: invalid signature\");\n\n _approve(owner, spender, value);\n }\n\n /**\n * @dev See {IERC20Permit-nonces}.\n */\n function nonces(address owner) public view virtual override returns (uint256) {\n return _nonces[owner].current();\n }\n\n /**\n * @dev See {IERC20Permit-DOMAIN_SEPARATOR}.\n */\n // solhint-disable-next-line func-name-mixedcase\n function DOMAIN_SEPARATOR() external view override returns (bytes32) {\n return _domainSeparatorV4();\n }\n\n /**\n * @dev \"Consume a nonce\": return the current value and increment.\n *\n * _Available since v4.1._\n */\n function _useNonce(address owner) internal virtual returns (uint256 current) {\n Counters.Counter storage nonce = _nonces[owner];\n current = nonce.current();\n nonce.increment();\n }\n}\n" }, "contracts/interfaces/ITokenLockup.sol": { "content": "// SPDX-License-Identifier: MIT\npragma solidity ^0.8.17;\n\ninterface ITokenLockup {\n\n struct Schedule {\n uint256 endTime;\n uint256 portion;\n }\n\n event Fund(\n address indexed recipient,\n uint256 amount\n );\n\n event Claim(\n address indexed recipient,\n uint256 claimed\n );\n event Reclaim(\n address indexed recipient,\n uint256 claimed\n );\n\n event ChangeRecipient(\n address indexed oldRecipient,\n address indexed newRecipient\n );\n\n function token() external view returns (address);\n\n function startTime() external view returns (uint256);\n function claimDelay() external view returns (uint256);\n function schedule(uint256 index) external view returns (uint256, uint256);\n\n function initialLocked(address account) external view returns (uint256);\n function totalClaimed(address account) external view returns (uint256);\n\n function initialLockedSupply() external view returns (uint256);\n function unallocatedSupply() external view returns (uint256);\n\n function addTokens(uint256 amount) external;\n function fund(address[] calldata recipients, uint256[] calldata amounts) external;\n\n function claim() external;\n function changeRecipient(address newRecipient) external;\n\n function unlockedSupply() external view returns (uint256);\n function lockedSupply() external view returns (uint256);\n\n function balanceOf(address account) external view returns (uint256);\n function unlockedOf(address account) external view returns (uint256);\n function lockedOf(address account) external view returns (uint256);\n}\n" }, "@openzeppelin/contracts/utils/Context.sol": { "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev Provides information about the current execution context, including the\n * sender of the transaction and its data. While these are generally available\n * via msg.sender and msg.data, they should not be accessed in such a direct\n * manner, since when dealing with meta-transactions the account sending and\n * paying for execution may not be the actual sender (as far as an application\n * is concerned).\n *\n * This contract is only required for intermediate, library-like contracts.\n */\nabstract contract Context {\n function _msgSender() internal view virtual returns (address) {\n return msg.sender;\n }\n\n function _msgData() internal view virtual returns (bytes calldata) {\n return msg.data;\n }\n}\n" }, "@openzeppelin/contracts/utils/math/Math.sol": { "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/Math.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev Standard math utilities missing in the Solidity language.\n */\nlibrary Math {\n enum Rounding {\n Down, // Toward negative infinity\n Up, // Toward infinity\n Zero // Toward zero\n }\n\n /**\n * @dev Returns the largest of two numbers.\n */\n function max(uint256 a, uint256 b) internal pure returns (uint256) {\n return a > b ? a : b;\n }\n\n /**\n * @dev Returns the smallest of two numbers.\n */\n function min(uint256 a, uint256 b) internal pure returns (uint256) {\n return a < b ? a : b;\n }\n\n /**\n * @dev Returns the average of two numbers. The result is rounded towards\n * zero.\n */\n function average(uint256 a, uint256 b) internal pure returns (uint256) {\n // (a + b) / 2 can overflow.\n return (a & b) + (a ^ b) / 2;\n }\n\n /**\n * @dev Returns the ceiling of the division of two numbers.\n *\n * This differs from standard division with `/` in that it rounds up instead\n * of rounding down.\n */\n function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {\n // (a + b - 1) / b can overflow on addition, so we distribute.\n return a == 0 ? 0 : (a - 1) / b + 1;\n }\n\n /**\n * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0\n * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)\n * with further edits by Uniswap Labs also under MIT license.\n */\n function mulDiv(\n uint256 x,\n uint256 y,\n uint256 denominator\n ) internal pure returns (uint256 result) {\n unchecked {\n // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use\n // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256\n // variables such that product = prod1 * 2^256 + prod0.\n uint256 prod0; // Least significant 256 bits of the product\n uint256 prod1; // Most significant 256 bits of the product\n assembly {\n let mm := mulmod(x, y, not(0))\n prod0 := mul(x, y)\n prod1 := sub(sub(mm, prod0), lt(mm, prod0))\n }\n\n // Handle non-overflow cases, 256 by 256 division.\n if (prod1 == 0) {\n return prod0 / denominator;\n }\n\n // Make sure the result is less than 2^256. Also prevents denominator == 0.\n require(denominator > prod1);\n\n ///////////////////////////////////////////////\n // 512 by 256 division.\n ///////////////////////////////////////////////\n\n // Make division exact by subtracting the remainder from [prod1 prod0].\n uint256 remainder;\n assembly {\n // Compute remainder using mulmod.\n remainder := mulmod(x, y, denominator)\n\n // Subtract 256 bit number from 512 bit number.\n prod1 := sub(prod1, gt(remainder, prod0))\n prod0 := sub(prod0, remainder)\n }\n\n // Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.\n // See https://cs.stackexchange.com/q/138556/92363.\n\n // Does not overflow because the denominator cannot be zero at this stage in the function.\n uint256 twos = denominator & (~denominator + 1);\n assembly {\n // Divide denominator by twos.\n denominator := div(denominator, twos)\n\n // Divide [prod1 prod0] by twos.\n prod0 := div(prod0, twos)\n\n // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.\n twos := add(div(sub(0, twos), twos), 1)\n }\n\n // Shift in bits from prod1 into prod0.\n prod0 |= prod1 * twos;\n\n // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such\n // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for\n // four bits. That is, denominator * inv = 1 mod 2^4.\n uint256 inverse = (3 * denominator) ^ 2;\n\n // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works\n // in modular arithmetic, doubling the correct bits in each step.\n inverse *= 2 - denominator * inverse; // inverse mod 2^8\n inverse *= 2 - denominator * inverse; // inverse mod 2^16\n inverse *= 2 - denominator * inverse; // inverse mod 2^32\n inverse *= 2 - denominator * inverse; // inverse mod 2^64\n inverse *= 2 - denominator * inverse; // inverse mod 2^128\n inverse *= 2 - denominator * inverse; // inverse mod 2^256\n\n // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.\n // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is\n // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1\n // is no longer required.\n result = prod0 * inverse;\n return result;\n }\n }\n\n /**\n * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.\n */\n function mulDiv(\n uint256 x,\n uint256 y,\n uint256 denominator,\n Rounding rounding\n ) internal pure returns (uint256) {\n uint256 result = mulDiv(x, y, denominator);\n if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {\n result += 1;\n }\n return result;\n }\n\n /**\n * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down.\n *\n * Inspired by Henry S. Warren, Jr.'s \"Hacker's Delight\" (Chapter 11).\n */\n function sqrt(uint256 a) internal pure returns (uint256) {\n if (a == 0) {\n return 0;\n }\n\n // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.\n //\n // We know that the \"msb\" (most significant bit) of our target number `a` is a power of 2 such that we have\n // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.\n //\n // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`\n // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`\n // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`\n //\n // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.\n uint256 result = 1 << (log2(a) >> 1);\n\n // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,\n // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at\n // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision\n // into the expected uint128 result.\n unchecked {\n result = (result + a / result) >> 1;\n result = (result + a / result) >> 1;\n result = (result + a / result) >> 1;\n result = (result + a / result) >> 1;\n result = (result + a / result) >> 1;\n result = (result + a / result) >> 1;\n result = (result + a / result) >> 1;\n return min(result, a / result);\n }\n }\n\n /**\n * @notice Calculates sqrt(a), following the selected rounding direction.\n */\n function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {\n unchecked {\n uint256 result = sqrt(a);\n return result + (rounding == Rounding.Up && result * result < a ? 1 : 0);\n }\n }\n\n /**\n * @dev Return the log in base 2, rounded down, of a positive value.\n * Returns 0 if given 0.\n */\n function log2(uint256 value) internal pure returns (uint256) {\n uint256 result = 0;\n unchecked {\n if (value >> 128 > 0) {\n value >>= 128;\n result += 128;\n }\n if (value >> 64 > 0) {\n value >>= 64;\n result += 64;\n }\n if (value >> 32 > 0) {\n value >>= 32;\n result += 32;\n }\n if (value >> 16 > 0) {\n value >>= 16;\n result += 16;\n }\n if (value >> 8 > 0) {\n value >>= 8;\n result += 8;\n }\n if (value >> 4 > 0) {\n value >>= 4;\n result += 4;\n }\n if (value >> 2 > 0) {\n value >>= 2;\n result += 2;\n }\n if (value >> 1 > 0) {\n result += 1;\n }\n }\n return result;\n }\n\n /**\n * @dev Return the log in base 2, following the selected rounding direction, of a positive value.\n * Returns 0 if given 0.\n */\n function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {\n unchecked {\n uint256 result = log2(value);\n return result + (rounding == Rounding.Up && 1 << result < value ? 1 : 0);\n }\n }\n\n /**\n * @dev Return the log in base 10, rounded down, of a positive value.\n * Returns 0 if given 0.\n */\n function log10(uint256 value) internal pure returns (uint256) {\n uint256 result = 0;\n unchecked {\n if (value >= 10**64) {\n value /= 10**64;\n result += 64;\n }\n if (value >= 10**32) {\n value /= 10**32;\n result += 32;\n }\n if (value >= 10**16) {\n value /= 10**16;\n result += 16;\n }\n if (value >= 10**8) {\n value /= 10**8;\n result += 8;\n }\n if (value >= 10**4) {\n value /= 10**4;\n result += 4;\n }\n if (value >= 10**2) {\n value /= 10**2;\n result += 2;\n }\n if (value >= 10**1) {\n result += 1;\n }\n }\n return result;\n }\n\n /**\n * @dev Return the log in base 10, following the selected rounding direction, of a positive value.\n * Returns 0 if given 0.\n */\n function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {\n unchecked {\n uint256 result = log10(value);\n return result + (rounding == Rounding.Up && 10**result < value ? 1 : 0);\n }\n }\n\n /**\n * @dev Return the log in base 256, rounded down, of a positive value.\n * Returns 0 if given 0.\n *\n * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.\n */\n function log256(uint256 value) internal pure returns (uint256) {\n uint256 result = 0;\n unchecked {\n if (value >> 128 > 0) {\n value >>= 128;\n result += 16;\n }\n if (value >> 64 > 0) {\n value >>= 64;\n result += 8;\n }\n if (value >> 32 > 0) {\n value >>= 32;\n result += 4;\n }\n if (value >> 16 > 0) {\n value >>= 16;\n result += 2;\n }\n if (value >> 8 > 0) {\n result += 1;\n }\n }\n return result;\n }\n\n /**\n * @dev Return the log in base 10, following the selected rounding direction, of a positive value.\n * Returns 0 if given 0.\n */\n function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {\n unchecked {\n uint256 result = log256(value);\n return result + (rounding == Rounding.Up && 1 << (result * 8) < value ? 1 : 0);\n }\n }\n}\n" }, "@openzeppelin/contracts/governance/utils/IVotes.sol": { "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.5.0) (governance/utils/IVotes.sol)\npragma solidity ^0.8.0;\n\n/**\n * @dev Common interface for {ERC20Votes}, {ERC721Votes}, and other {Votes}-enabled contracts.\n *\n * _Available since v4.5._\n */\ninterface IVotes {\n /**\n * @dev Emitted when an account changes their delegate.\n */\n event DelegateChanged(address indexed delegator, address indexed fromDelegate, address indexed toDelegate);\n\n /**\n * @dev Emitted when a token transfer or delegate change results in changes to a delegate's number of votes.\n */\n event DelegateVotesChanged(address indexed delegate, uint256 previousBalance, uint256 newBalance);\n\n /**\n * @dev Returns the current amount of votes that `account` has.\n */\n function getVotes(address account) external view returns (uint256);\n\n /**\n * @dev Returns the amount of votes that `account` had at the end of a past block (`blockNumber`).\n */\n function getPastVotes(address account, uint256 blockNumber) external view returns (uint256);\n\n /**\n * @dev Returns the total supply of votes available at the end of a past block (`blockNumber`).\n *\n * NOTE: This value is the sum of all available votes, which is not necessarily the sum of all delegated votes.\n * Votes that have not been delegated are still part of total supply, even though they would not participate in a\n * vote.\n */\n function getPastTotalSupply(uint256 blockNumber) external view returns (uint256);\n\n /**\n * @dev Returns the delegate that `account` has chosen.\n */\n function delegates(address account) external view returns (address);\n\n /**\n * @dev Delegates votes from the sender to `delegatee`.\n */\n function delegate(address delegatee) external;\n\n /**\n * @dev Delegates votes from signer to `delegatee`.\n */\n function delegateBySig(\n address delegatee,\n uint256 nonce,\n uint256 expiry,\n uint8 v,\n bytes32 r,\n bytes32 s\n ) external;\n}\n" }, "@openzeppelin/contracts/utils/math/SafeCast.sol": { "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/SafeCast.sol)\n// This file was procedurally generated from scripts/generate/templates/SafeCast.js.\n\npragma solidity ^0.8.0;\n\n/**\n * @dev Wrappers over Solidity's uintXX/intXX casting operators with added overflow\n * checks.\n *\n * Downcasting from uint256/int256 in Solidity does not revert on overflow. This can\n * easily result in undesired exploitation or bugs, since developers usually\n * assume that overflows raise errors. `SafeCast` restores this intuition by\n * reverting the transaction when such an operation overflows.\n *\n * Using this library instead of the unchecked operations eliminates an entire\n * class of bugs, so it's recommended to use it always.\n *\n * Can be combined with {SafeMath} and {SignedSafeMath} to extend it to smaller types, by performing\n * all math on `uint256` and `int256` and then downcasting.\n */\nlibrary SafeCast {\n /**\n * @dev Returns the downcasted uint248 from uint256, reverting on\n * overflow (when the input is greater than largest uint248).\n *\n * Counterpart to Solidity's `uint248` operator.\n *\n * Requirements:\n *\n * - input must fit into 248 bits\n *\n * _Available since v4.7._\n */\n function toUint248(uint256 value) internal pure returns (uint248) {\n require(value <= type(uint248).max, \"SafeCast: value doesn't fit in 248 bits\");\n return uint248(value);\n }\n\n /**\n * @dev Returns the downcasted uint240 from uint256, reverting on\n * overflow (when the input is greater than largest uint240).\n *\n * Counterpart to Solidity's `uint240` operator.\n *\n * Requirements:\n *\n * - input must fit into 240 bits\n *\n * _Available since v4.7._\n */\n function toUint240(uint256 value) internal pure returns (uint240) {\n require(value <= type(uint240).max, \"SafeCast: value doesn't fit in 240 bits\");\n return uint240(value);\n }\n\n /**\n * @dev Returns the downcasted uint232 from uint256, reverting on\n * overflow (when the input is greater than largest uint232).\n *\n * Counterpart to Solidity's `uint232` operator.\n *\n * Requirements:\n *\n * - input must fit into 232 bits\n *\n * _Available since v4.7._\n */\n function toUint232(uint256 value) internal pure returns (uint232) {\n require(value <= type(uint232).max, \"SafeCast: value doesn't fit in 232 bits\");\n return uint232(value);\n }\n\n /**\n * @dev Returns the downcasted uint224 from uint256, reverting on\n * overflow (when the input is greater than largest uint224).\n *\n * Counterpart to Solidity's `uint224` operator.\n *\n * Requirements:\n *\n * - input must fit into 224 bits\n *\n * _Available since v4.2._\n */\n function toUint224(uint256 value) internal pure returns (uint224) {\n require(value <= type(uint224).max, \"SafeCast: value doesn't fit in 224 bits\");\n return uint224(value);\n }\n\n /**\n * @dev Returns the downcasted uint216 from uint256, reverting on\n * overflow (when the input is greater than largest uint216).\n *\n * Counterpart to Solidity's `uint216` operator.\n *\n * Requirements:\n *\n * - input must fit into 216 bits\n *\n * _Available since v4.7._\n */\n function toUint216(uint256 value) internal pure returns (uint216) {\n require(value <= type(uint216).max, \"SafeCast: value doesn't fit in 216 bits\");\n return uint216(value);\n }\n\n /**\n * @dev Returns the downcasted uint208 from uint256, reverting on\n * overflow (when the input is greater than largest uint208).\n *\n * Counterpart to Solidity's `uint208` operator.\n *\n * Requirements:\n *\n * - input must fit into 208 bits\n *\n * _Available since v4.7._\n */\n function toUint208(uint256 value) internal pure returns (uint208) {\n require(value <= type(uint208).max, \"SafeCast: value doesn't fit in 208 bits\");\n return uint208(value);\n }\n\n /**\n * @dev Returns the downcasted uint200 from uint256, reverting on\n * overflow (when the input is greater than largest uint200).\n *\n * Counterpart to Solidity's `uint200` operator.\n *\n * Requirements:\n *\n * - input must fit into 200 bits\n *\n * _Available since v4.7._\n */\n function toUint200(uint256 value) internal pure returns (uint200) {\n require(value <= type(uint200).max, \"SafeCast: value doesn't fit in 200 bits\");\n return uint200(value);\n }\n\n /**\n * @dev Returns the downcasted uint192 from uint256, reverting on\n * overflow (when the input is greater than largest uint192).\n *\n * Counterpart to Solidity's `uint192` operator.\n *\n * Requirements:\n *\n * - input must fit into 192 bits\n *\n * _Available since v4.7._\n */\n function toUint192(uint256 value) internal pure returns (uint192) {\n require(value <= type(uint192).max, \"SafeCast: value doesn't fit in 192 bits\");\n return uint192(value);\n }\n\n /**\n * @dev Returns the downcasted uint184 from uint256, reverting on\n * overflow (when the input is greater than largest uint184).\n *\n * Counterpart to Solidity's `uint184` operator.\n *\n * Requirements:\n *\n * - input must fit into 184 bits\n *\n * _Available since v4.7._\n */\n function toUint184(uint256 value) internal pure returns (uint184) {\n require(value <= type(uint184).max, \"SafeCast: value doesn't fit in 184 bits\");\n return uint184(value);\n }\n\n /**\n * @dev Returns the downcasted uint176 from uint256, reverting on\n * overflow (when the input is greater than largest uint176).\n *\n * Counterpart to Solidity's `uint176` operator.\n *\n * Requirements:\n *\n * - input must fit into 176 bits\n *\n * _Available since v4.7._\n */\n function toUint176(uint256 value) internal pure returns (uint176) {\n require(value <= type(uint176).max, \"SafeCast: value doesn't fit in 176 bits\");\n return uint176(value);\n }\n\n /**\n * @dev Returns the downcasted uint168 from uint256, reverting on\n * overflow (when the input is greater than largest uint168).\n *\n * Counterpart to Solidity's `uint168` operator.\n *\n * Requirements:\n *\n * - input must fit into 168 bits\n *\n * _Available since v4.7._\n */\n function toUint168(uint256 value) internal pure returns (uint168) {\n require(value <= type(uint168).max, \"SafeCast: value doesn't fit in 168 bits\");\n return uint168(value);\n }\n\n /**\n * @dev Returns the downcasted uint160 from uint256, reverting on\n * overflow (when the input is greater than largest uint160).\n *\n * Counterpart to Solidity's `uint160` operator.\n *\n * Requirements:\n *\n * - input must fit into 160 bits\n *\n * _Available since v4.7._\n */\n function toUint160(uint256 value) internal pure returns (uint160) {\n require(value <= type(uint160).max, \"SafeCast: value doesn't fit in 160 bits\");\n return uint160(value);\n }\n\n /**\n * @dev Returns the downcasted uint152 from uint256, reverting on\n * overflow (when the input is greater than largest uint152).\n *\n * Counterpart to Solidity's `uint152` operator.\n *\n * Requirements:\n *\n * - input must fit into 152 bits\n *\n * _Available since v4.7._\n */\n function toUint152(uint256 value) internal pure returns (uint152) {\n require(value <= type(uint152).max, \"SafeCast: value doesn't fit in 152 bits\");\n return uint152(value);\n }\n\n /**\n * @dev Returns the downcasted uint144 from uint256, reverting on\n * overflow (when the input is greater than largest uint144).\n *\n * Counterpart to Solidity's `uint144` operator.\n *\n * Requirements:\n *\n * - input must fit into 144 bits\n *\n * _Available since v4.7._\n */\n function toUint144(uint256 value) internal pure returns (uint144) {\n require(value <= type(uint144).max, \"SafeCast: value doesn't fit in 144 bits\");\n return uint144(value);\n }\n\n /**\n * @dev Returns the downcasted uint136 from uint256, reverting on\n * overflow (when the input is greater than largest uint136).\n *\n * Counterpart to Solidity's `uint136` operator.\n *\n * Requirements:\n *\n * - input must fit into 136 bits\n *\n * _Available since v4.7._\n */\n function toUint136(uint256 value) internal pure returns (uint136) {\n require(value <= type(uint136).max, \"SafeCast: value doesn't fit in 136 bits\");\n return uint136(value);\n }\n\n /**\n * @dev Returns the downcasted uint128 from uint256, reverting on\n * overflow (when the input is greater than largest uint128).\n *\n * Counterpart to Solidity's `uint128` operator.\n *\n * Requirements:\n *\n * - input must fit into 128 bits\n *\n * _Available since v2.5._\n */\n function toUint128(uint256 value) internal pure returns (uint128) {\n require(value <= type(uint128).max, \"SafeCast: value doesn't fit in 128 bits\");\n return uint128(value);\n }\n\n /**\n * @dev Returns the downcasted uint120 from uint256, reverting on\n * overflow (when the input is greater than largest uint120).\n *\n * Counterpart to Solidity's `uint120` operator.\n *\n * Requirements:\n *\n * - input must fit into 120 bits\n *\n * _Available since v4.7._\n */\n function toUint120(uint256 value) internal pure returns (uint120) {\n require(value <= type(uint120).max, \"SafeCast: value doesn't fit in 120 bits\");\n return uint120(value);\n }\n\n /**\n * @dev Returns the downcasted uint112 from uint256, reverting on\n * overflow (when the input is greater than largest uint112).\n *\n * Counterpart to Solidity's `uint112` operator.\n *\n * Requirements:\n *\n * - input must fit into 112 bits\n *\n * _Available since v4.7._\n */\n function toUint112(uint256 value) internal pure returns (uint112) {\n require(value <= type(uint112).max, \"SafeCast: value doesn't fit in 112 bits\");\n return uint112(value);\n }\n\n /**\n * @dev Returns the downcasted uint104 from uint256, reverting on\n * overflow (when the input is greater than largest uint104).\n *\n * Counterpart to Solidity's `uint104` operator.\n *\n * Requirements:\n *\n * - input must fit into 104 bits\n *\n * _Available since v4.7._\n */\n function toUint104(uint256 value) internal pure returns (uint104) {\n require(value <= type(uint104).max, \"SafeCast: value doesn't fit in 104 bits\");\n return uint104(value);\n }\n\n /**\n * @dev Returns the downcasted uint96 from uint256, reverting on\n * overflow (when the input is greater than largest uint96).\n *\n * Counterpart to Solidity's `uint96` operator.\n *\n * Requirements:\n *\n * - input must fit into 96 bits\n *\n * _Available since v4.2._\n */\n function toUint96(uint256 value) internal pure returns (uint96) {\n require(value <= type(uint96).max, \"SafeCast: value doesn't fit in 96 bits\");\n return uint96(value);\n }\n\n /**\n * @dev Returns the downcasted uint88 from uint256, reverting on\n * overflow (when the input is greater than largest uint88).\n *\n * Counterpart to Solidity's `uint88` operator.\n *\n * Requirements:\n *\n * - input must fit into 88 bits\n *\n * _Available since v4.7._\n */\n function toUint88(uint256 value) internal pure returns (uint88) {\n require(value <= type(uint88).max, \"SafeCast: value doesn't fit in 88 bits\");\n return uint88(value);\n }\n\n /**\n * @dev Returns the downcasted uint80 from uint256, reverting on\n * overflow (when the input is greater than largest uint80).\n *\n * Counterpart to Solidity's `uint80` operator.\n *\n * Requirements:\n *\n * - input must fit into 80 bits\n *\n * _Available since v4.7._\n */\n function toUint80(uint256 value) internal pure returns (uint80) {\n require(value <= type(uint80).max, \"SafeCast: value doesn't fit in 80 bits\");\n return uint80(value);\n }\n\n /**\n * @dev Returns the downcasted uint72 from uint256, reverting on\n * overflow (when the input is greater than largest uint72).\n *\n * Counterpart to Solidity's `uint72` operator.\n *\n * Requirements:\n *\n * - input must fit into 72 bits\n *\n * _Available since v4.7._\n */\n function toUint72(uint256 value) internal pure returns (uint72) {\n require(value <= type(uint72).max, \"SafeCast: value doesn't fit in 72 bits\");\n return uint72(value);\n }\n\n /**\n * @dev Returns the downcasted uint64 from uint256, reverting on\n * overflow (when the input is greater than largest uint64).\n *\n * Counterpart to Solidity's `uint64` operator.\n *\n * Requirements:\n *\n * - input must fit into 64 bits\n *\n * _Available since v2.5._\n */\n function toUint64(uint256 value) internal pure returns (uint64) {\n require(value <= type(uint64).max, \"SafeCast: value doesn't fit in 64 bits\");\n return uint64(value);\n }\n\n /**\n * @dev Returns the downcasted uint56 from uint256, reverting on\n * overflow (when the input is greater than largest uint56).\n *\n * Counterpart to Solidity's `uint56` operator.\n *\n * Requirements:\n *\n * - input must fit into 56 bits\n *\n * _Available since v4.7._\n */\n function toUint56(uint256 value) internal pure returns (uint56) {\n require(value <= type(uint56).max, \"SafeCast: value doesn't fit in 56 bits\");\n return uint56(value);\n }\n\n /**\n * @dev Returns the downcasted uint48 from uint256, reverting on\n * overflow (when the input is greater than largest uint48).\n *\n * Counterpart to Solidity's `uint48` operator.\n *\n * Requirements:\n *\n * - input must fit into 48 bits\n *\n * _Available since v4.7._\n */\n function toUint48(uint256 value) internal pure returns (uint48) {\n require(value <= type(uint48).max, \"SafeCast: value doesn't fit in 48 bits\");\n return uint48(value);\n }\n\n /**\n * @dev Returns the downcasted uint40 from uint256, reverting on\n * overflow (when the input is greater than largest uint40).\n *\n * Counterpart to Solidity's `uint40` operator.\n *\n * Requirements:\n *\n * - input must fit into 40 bits\n *\n * _Available since v4.7._\n */\n function toUint40(uint256 value) internal pure returns (uint40) {\n require(value <= type(uint40).max, \"SafeCast: value doesn't fit in 40 bits\");\n return uint40(value);\n }\n\n /**\n * @dev Returns the downcasted uint32 from uint256, reverting on\n * overflow (when the input is greater than largest uint32).\n *\n * Counterpart to Solidity's `uint32` operator.\n *\n * Requirements:\n *\n * - input must fit into 32 bits\n *\n * _Available since v2.5._\n */\n function toUint32(uint256 value) internal pure returns (uint32) {\n require(value <= type(uint32).max, \"SafeCast: value doesn't fit in 32 bits\");\n return uint32(value);\n }\n\n /**\n * @dev Returns the downcasted uint24 from uint256, reverting on\n * overflow (when the input is greater than largest uint24).\n *\n * Counterpart to Solidity's `uint24` operator.\n *\n * Requirements:\n *\n * - input must fit into 24 bits\n *\n * _Available since v4.7._\n */\n function toUint24(uint256 value) internal pure returns (uint24) {\n require(value <= type(uint24).max, \"SafeCast: value doesn't fit in 24 bits\");\n return uint24(value);\n }\n\n /**\n * @dev Returns the downcasted uint16 from uint256, reverting on\n * overflow (when the input is greater than largest uint16).\n *\n * Counterpart to Solidity's `uint16` operator.\n *\n * Requirements:\n *\n * - input must fit into 16 bits\n *\n * _Available since v2.5._\n */\n function toUint16(uint256 value) internal pure returns (uint16) {\n require(value <= type(uint16).max, \"SafeCast: value doesn't fit in 16 bits\");\n return uint16(value);\n }\n\n /**\n * @dev Returns the downcasted uint8 from uint256, reverting on\n * overflow (when the input is greater than largest uint8).\n *\n * Counterpart to Solidity's `uint8` operator.\n *\n * Requirements:\n *\n * - input must fit into 8 bits\n *\n * _Available since v2.5._\n */\n function toUint8(uint256 value) internal pure returns (uint8) {\n require(value <= type(uint8).max, \"SafeCast: value doesn't fit in 8 bits\");\n return uint8(value);\n }\n\n /**\n * @dev Converts a signed int256 into an unsigned uint256.\n *\n * Requirements:\n *\n * - input must be greater than or equal to 0.\n *\n * _Available since v3.0._\n */\n function toUint256(int256 value) internal pure returns (uint256) {\n require(value >= 0, \"SafeCast: value must be positive\");\n return uint256(value);\n }\n\n /**\n * @dev Returns the downcasted int248 from int256, reverting on\n * overflow (when the input is less than smallest int248 or\n * greater than largest int248).\n *\n * Counterpart to Solidity's `int248` operator.\n *\n * Requirements:\n *\n * - input must fit into 248 bits\n *\n * _Available since v4.7._\n */\n function toInt248(int256 value) internal pure returns (int248 downcasted) {\n downcasted = int248(value);\n require(downcasted == value, \"SafeCast: value doesn't fit in 248 bits\");\n }\n\n /**\n * @dev Returns the downcasted int240 from int256, reverting on\n * overflow (when the input is less than smallest int240 or\n * greater than largest int240).\n *\n * Counterpart to Solidity's `int240` operator.\n *\n * Requirements:\n *\n * - input must fit into 240 bits\n *\n * _Available since v4.7._\n */\n function toInt240(int256 value) internal pure returns (int240 downcasted) {\n downcasted = int240(value);\n require(downcasted == value, \"SafeCast: value doesn't fit in 240 bits\");\n }\n\n /**\n * @dev Returns the downcasted int232 from int256, reverting on\n * overflow (when the input is less than smallest int232 or\n * greater than largest int232).\n *\n * Counterpart to Solidity's `int232` operator.\n *\n * Requirements:\n *\n * - input must fit into 232 bits\n *\n * _Available since v4.7._\n */\n function toInt232(int256 value) internal pure returns (int232 downcasted) {\n downcasted = int232(value);\n require(downcasted == value, \"SafeCast: value doesn't fit in 232 bits\");\n }\n\n /**\n * @dev Returns the downcasted int224 from int256, reverting on\n * overflow (when the input is less than smallest int224 or\n * greater than largest int224).\n *\n * Counterpart to Solidity's `int224` operator.\n *\n * Requirements:\n *\n * - input must fit into 224 bits\n *\n * _Available since v4.7._\n */\n function toInt224(int256 value) internal pure returns (int224 downcasted) {\n downcasted = int224(value);\n require(downcasted == value, \"SafeCast: value doesn't fit in 224 bits\");\n }\n\n /**\n * @dev Returns the downcasted int216 from int256, reverting on\n * overflow (when the input is less than smallest int216 or\n * greater than largest int216).\n *\n * Counterpart to Solidity's `int216` operator.\n *\n * Requirements:\n *\n * - input must fit into 216 bits\n *\n * _Available since v4.7._\n */\n function toInt216(int256 value) internal pure returns (int216 downcasted) {\n downcasted = int216(value);\n require(downcasted == value, \"SafeCast: value doesn't fit in 216 bits\");\n }\n\n /**\n * @dev Returns the downcasted int208 from int256, reverting on\n * overflow (when the input is less than smallest int208 or\n * greater than largest int208).\n *\n * Counterpart to Solidity's `int208` operator.\n *\n * Requirements:\n *\n * - input must fit into 208 bits\n *\n * _Available since v4.7._\n */\n function toInt208(int256 value) internal pure returns (int208 downcasted) {\n downcasted = int208(value);\n require(downcasted == value, \"SafeCast: value doesn't fit in 208 bits\");\n }\n\n /**\n * @dev Returns the downcasted int200 from int256, reverting on\n * overflow (when the input is less than smallest int200 or\n * greater than largest int200).\n *\n * Counterpart to Solidity's `int200` operator.\n *\n * Requirements:\n *\n * - input must fit into 200 bits\n *\n * _Available since v4.7._\n */\n function toInt200(int256 value) internal pure returns (int200 downcasted) {\n downcasted = int200(value);\n require(downcasted == value, \"SafeCast: value doesn't fit in 200 bits\");\n }\n\n /**\n * @dev Returns the downcasted int192 from int256, reverting on\n * overflow (when the input is less than smallest int192 or\n * greater than largest int192).\n *\n * Counterpart to Solidity's `int192` operator.\n *\n * Requirements:\n *\n * - input must fit into 192 bits\n *\n * _Available since v4.7._\n */\n function toInt192(int256 value) internal pure returns (int192 downcasted) {\n downcasted = int192(value);\n require(downcasted == value, \"SafeCast: value doesn't fit in 192 bits\");\n }\n\n /**\n * @dev Returns the downcasted int184 from int256, reverting on\n * overflow (when the input is less than smallest int184 or\n * greater than largest int184).\n *\n * Counterpart to Solidity's `int184` operator.\n *\n * Requirements:\n *\n * - input must fit into 184 bits\n *\n * _Available since v4.7._\n */\n function toInt184(int256 value) internal pure returns (int184 downcasted) {\n downcasted = int184(value);\n require(downcasted == value, \"SafeCast: value doesn't fit in 184 bits\");\n }\n\n /**\n * @dev Returns the downcasted int176 from int256, reverting on\n * overflow (when the input is less than smallest int176 or\n * greater than largest int176).\n *\n * Counterpart to Solidity's `int176` operator.\n *\n * Requirements:\n *\n * - input must fit into 176 bits\n *\n * _Available since v4.7._\n */\n function toInt176(int256 value) internal pure returns (int176 downcasted) {\n downcasted = int176(value);\n require(downcasted == value, \"SafeCast: value doesn't fit in 176 bits\");\n }\n\n /**\n * @dev Returns the downcasted int168 from int256, reverting on\n * overflow (when the input is less than smallest int168 or\n * greater than largest int168).\n *\n * Counterpart to Solidity's `int168` operator.\n *\n * Requirements:\n *\n * - input must fit into 168 bits\n *\n * _Available since v4.7._\n */\n function toInt168(int256 value) internal pure returns (int168 downcasted) {\n downcasted = int168(value);\n require(downcasted == value, \"SafeCast: value doesn't fit in 168 bits\");\n }\n\n /**\n * @dev Returns the downcasted int160 from int256, reverting on\n * overflow (when the input is less than smallest int160 or\n * greater than largest int160).\n *\n * Counterpart to Solidity's `int160` operator.\n *\n * Requirements:\n *\n * - input must fit into 160 bits\n *\n * _Available since v4.7._\n */\n function toInt160(int256 value) internal pure returns (int160 downcasted) {\n downcasted = int160(value);\n require(downcasted == value, \"SafeCast: value doesn't fit in 160 bits\");\n }\n\n /**\n * @dev Returns the downcasted int152 from int256, reverting on\n * overflow (when the input is less than smallest int152 or\n * greater than largest int152).\n *\n * Counterpart to Solidity's `int152` operator.\n *\n * Requirements:\n *\n * - input must fit into 152 bits\n *\n * _Available since v4.7._\n */\n function toInt152(int256 value) internal pure returns (int152 downcasted) {\n downcasted = int152(value);\n require(downcasted == value, \"SafeCast: value doesn't fit in 152 bits\");\n }\n\n /**\n * @dev Returns the downcasted int144 from int256, reverting on\n * overflow (when the input is less than smallest int144 or\n * greater than largest int144).\n *\n * Counterpart to Solidity's `int144` operator.\n *\n * Requirements:\n *\n * - input must fit into 144 bits\n *\n * _Available since v4.7._\n */\n function toInt144(int256 value) internal pure returns (int144 downcasted) {\n downcasted = int144(value);\n require(downcasted == value, \"SafeCast: value doesn't fit in 144 bits\");\n }\n\n /**\n * @dev Returns the downcasted int136 from int256, reverting on\n * overflow (when the input is less than smallest int136 or\n * greater than largest int136).\n *\n * Counterpart to Solidity's `int136` operator.\n *\n * Requirements:\n *\n * - input must fit into 136 bits\n *\n * _Available since v4.7._\n */\n function toInt136(int256 value) internal pure returns (int136 downcasted) {\n downcasted = int136(value);\n require(downcasted == value, \"SafeCast: value doesn't fit in 136 bits\");\n }\n\n /**\n * @dev Returns the downcasted int128 from int256, reverting on\n * overflow (when the input is less than smallest int128 or\n * greater than largest int128).\n *\n * Counterpart to Solidity's `int128` operator.\n *\n * Requirements:\n *\n * - input must fit into 128 bits\n *\n * _Available since v3.1._\n */\n function toInt128(int256 value) internal pure returns (int128 downcasted) {\n downcasted = int128(value);\n require(downcasted == value, \"SafeCast: value doesn't fit in 128 bits\");\n }\n\n /**\n * @dev Returns the downcasted int120 from int256, reverting on\n * overflow (when the input is less than smallest int120 or\n * greater than largest int120).\n *\n * Counterpart to Solidity's `int120` operator.\n *\n * Requirements:\n *\n * - input must fit into 120 bits\n *\n * _Available since v4.7._\n */\n function toInt120(int256 value) internal pure returns (int120 downcasted) {\n downcasted = int120(value);\n require(downcasted == value, \"SafeCast: value doesn't fit in 120 bits\");\n }\n\n /**\n * @dev Returns the downcasted int112 from int256, reverting on\n * overflow (when the input is less than smallest int112 or\n * greater than largest int112).\n *\n * Counterpart to Solidity's `int112` operator.\n *\n * Requirements:\n *\n * - input must fit into 112 bits\n *\n * _Available since v4.7._\n */\n function toInt112(int256 value) internal pure returns (int112 downcasted) {\n downcasted = int112(value);\n require(downcasted == value, \"SafeCast: value doesn't fit in 112 bits\");\n }\n\n /**\n * @dev Returns the downcasted int104 from int256, reverting on\n * overflow (when the input is less than smallest int104 or\n * greater than largest int104).\n *\n * Counterpart to Solidity's `int104` operator.\n *\n * Requirements:\n *\n * - input must fit into 104 bits\n *\n * _Available since v4.7._\n */\n function toInt104(int256 value) internal pure returns (int104 downcasted) {\n downcasted = int104(value);\n require(downcasted == value, \"SafeCast: value doesn't fit in 104 bits\");\n }\n\n /**\n * @dev Returns the downcasted int96 from int256, reverting on\n * overflow (when the input is less than smallest int96 or\n * greater than largest int96).\n *\n * Counterpart to Solidity's `int96` operator.\n *\n * Requirements:\n *\n * - input must fit into 96 bits\n *\n * _Available since v4.7._\n */\n function toInt96(int256 value) internal pure returns (int96 downcasted) {\n downcasted = int96(value);\n require(downcasted == value, \"SafeCast: value doesn't fit in 96 bits\");\n }\n\n /**\n * @dev Returns the downcasted int88 from int256, reverting on\n * overflow (when the input is less than smallest int88 or\n * greater than largest int88).\n *\n * Counterpart to Solidity's `int88` operator.\n *\n * Requirements:\n *\n * - input must fit into 88 bits\n *\n * _Available since v4.7._\n */\n function toInt88(int256 value) internal pure returns (int88 downcasted) {\n downcasted = int88(value);\n require(downcasted == value, \"SafeCast: value doesn't fit in 88 bits\");\n }\n\n /**\n * @dev Returns the downcasted int80 from int256, reverting on\n * overflow (when the input is less than smallest int80 or\n * greater than largest int80).\n *\n * Counterpart to Solidity's `int80` operator.\n *\n * Requirements:\n *\n * - input must fit into 80 bits\n *\n * _Available since v4.7._\n */\n function toInt80(int256 value) internal pure returns (int80 downcasted) {\n downcasted = int80(value);\n require(downcasted == value, \"SafeCast: value doesn't fit in 80 bits\");\n }\n\n /**\n * @dev Returns the downcasted int72 from int256, reverting on\n * overflow (when the input is less than smallest int72 or\n * greater than largest int72).\n *\n * Counterpart to Solidity's `int72` operator.\n *\n * Requirements:\n *\n * - input must fit into 72 bits\n *\n * _Available since v4.7._\n */\n function toInt72(int256 value) internal pure returns (int72 downcasted) {\n downcasted = int72(value);\n require(downcasted == value, \"SafeCast: value doesn't fit in 72 bits\");\n }\n\n /**\n * @dev Returns the downcasted int64 from int256, reverting on\n * overflow (when the input is less than smallest int64 or\n * greater than largest int64).\n *\n * Counterpart to Solidity's `int64` operator.\n *\n * Requirements:\n *\n * - input must fit into 64 bits\n *\n * _Available since v3.1._\n */\n function toInt64(int256 value) internal pure returns (int64 downcasted) {\n downcasted = int64(value);\n require(downcasted == value, \"SafeCast: value doesn't fit in 64 bits\");\n }\n\n /**\n * @dev Returns the downcasted int56 from int256, reverting on\n * overflow (when the input is less than smallest int56 or\n * greater than largest int56).\n *\n * Counterpart to Solidity's `int56` operator.\n *\n * Requirements:\n *\n * - input must fit into 56 bits\n *\n * _Available since v4.7._\n */\n function toInt56(int256 value) internal pure returns (int56 downcasted) {\n downcasted = int56(value);\n require(downcasted == value, \"SafeCast: value doesn't fit in 56 bits\");\n }\n\n /**\n * @dev Returns the downcasted int48 from int256, reverting on\n * overflow (when the input is less than smallest int48 or\n * greater than largest int48).\n *\n * Counterpart to Solidity's `int48` operator.\n *\n * Requirements:\n *\n * - input must fit into 48 bits\n *\n * _Available since v4.7._\n */\n function toInt48(int256 value) internal pure returns (int48 downcasted) {\n downcasted = int48(value);\n require(downcasted == value, \"SafeCast: value doesn't fit in 48 bits\");\n }\n\n /**\n * @dev Returns the downcasted int40 from int256, reverting on\n * overflow (when the input is less than smallest int40 or\n * greater than largest int40).\n *\n * Counterpart to Solidity's `int40` operator.\n *\n * Requirements:\n *\n * - input must fit into 40 bits\n *\n * _Available since v4.7._\n */\n function toInt40(int256 value) internal pure returns (int40 downcasted) {\n downcasted = int40(value);\n require(downcasted == value, \"SafeCast: value doesn't fit in 40 bits\");\n }\n\n /**\n * @dev Returns the downcasted int32 from int256, reverting on\n * overflow (when the input is less than smallest int32 or\n * greater than largest int32).\n *\n * Counterpart to Solidity's `int32` operator.\n *\n * Requirements:\n *\n * - input must fit into 32 bits\n *\n * _Available since v3.1._\n */\n function toInt32(int256 value) internal pure returns (int32 downcasted) {\n downcasted = int32(value);\n require(downcasted == value, \"SafeCast: value doesn't fit in 32 bits\");\n }\n\n /**\n * @dev Returns the downcasted int24 from int256, reverting on\n * overflow (when the input is less than smallest int24 or\n * greater than largest int24).\n *\n * Counterpart to Solidity's `int24` operator.\n *\n * Requirements:\n *\n * - input must fit into 24 bits\n *\n * _Available since v4.7._\n */\n function toInt24(int256 value) internal pure returns (int24 downcasted) {\n downcasted = int24(value);\n require(downcasted == value, \"SafeCast: value doesn't fit in 24 bits\");\n }\n\n /**\n * @dev Returns the downcasted int16 from int256, reverting on\n * overflow (when the input is less than smallest int16 or\n * greater than largest int16).\n *\n * Counterpart to Solidity's `int16` operator.\n *\n * Requirements:\n *\n * - input must fit into 16 bits\n *\n * _Available since v3.1._\n */\n function toInt16(int256 value) internal pure returns (int16 downcasted) {\n downcasted = int16(value);\n require(downcasted == value, \"SafeCast: value doesn't fit in 16 bits\");\n }\n\n /**\n * @dev Returns the downcasted int8 from int256, reverting on\n * overflow (when the input is less than smallest int8 or\n * greater than largest int8).\n *\n * Counterpart to Solidity's `int8` operator.\n *\n * Requirements:\n *\n * - input must fit into 8 bits\n *\n * _Available since v3.1._\n */\n function toInt8(int256 value) internal pure returns (int8 downcasted) {\n downcasted = int8(value);\n require(downcasted == value, \"SafeCast: value doesn't fit in 8 bits\");\n }\n\n /**\n * @dev Converts an unsigned uint256 into a signed int256.\n *\n * Requirements:\n *\n * - input must be less than or equal to maxInt256.\n *\n * _Available since v3.0._\n */\n function toInt256(uint256 value) internal pure returns (int256) {\n // Note: Unsafe cast below is okay because `type(int256).max` is guaranteed to be positive\n require(value <= uint256(type(int256).max), \"SafeCast: value doesn't fit in an int256\");\n return int256(value);\n }\n}\n" }, "@openzeppelin/contracts/utils/cryptography/ECDSA.sol": { "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.8.0) (utils/cryptography/ECDSA.sol)\n\npragma solidity ^0.8.0;\n\nimport \"../Strings.sol\";\n\n/**\n * @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.\n *\n * These functions can be used to verify that a message was signed by the holder\n * of the private keys of a given address.\n */\nlibrary ECDSA {\n enum RecoverError {\n NoError,\n InvalidSignature,\n InvalidSignatureLength,\n InvalidSignatureS,\n InvalidSignatureV // Deprecated in v4.8\n }\n\n function _throwError(RecoverError error) private pure {\n if (error == RecoverError.NoError) {\n return; // no error: do nothing\n } else if (error == RecoverError.InvalidSignature) {\n revert(\"ECDSA: invalid signature\");\n } else if (error == RecoverError.InvalidSignatureLength) {\n revert(\"ECDSA: invalid signature length\");\n } else if (error == RecoverError.InvalidSignatureS) {\n revert(\"ECDSA: invalid signature 's' value\");\n }\n }\n\n /**\n * @dev Returns the address that signed a hashed message (`hash`) with\n * `signature` or error string. This address can then be used for verification purposes.\n *\n * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:\n * this function rejects them by requiring the `s` value to be in the lower\n * half order, and the `v` value to be either 27 or 28.\n *\n * IMPORTANT: `hash` _must_ be the result of a hash operation for the\n * verification to be secure: it is possible to craft signatures that\n * recover to arbitrary addresses for non-hashed data. A safe way to ensure\n * this is by receiving a hash of the original message (which may otherwise\n * be too long), and then calling {toEthSignedMessageHash} on it.\n *\n * Documentation for signature generation:\n * - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]\n * - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]\n *\n * _Available since v4.3._\n */\n function tryRecover(bytes32 hash, bytes memory signature) internal pure returns (address, RecoverError) {\n if (signature.length == 65) {\n bytes32 r;\n bytes32 s;\n uint8 v;\n // ecrecover takes the signature parameters, and the only way to get them\n // currently is to use assembly.\n /// @solidity memory-safe-assembly\n assembly {\n r := mload(add(signature, 0x20))\n s := mload(add(signature, 0x40))\n v := byte(0, mload(add(signature, 0x60)))\n }\n return tryRecover(hash, v, r, s);\n } else {\n return (address(0), RecoverError.InvalidSignatureLength);\n }\n }\n\n /**\n * @dev Returns the address that signed a hashed message (`hash`) with\n * `signature`. This address can then be used for verification purposes.\n *\n * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:\n * this function rejects them by requiring the `s` value to be in the lower\n * half order, and the `v` value to be either 27 or 28.\n *\n * IMPORTANT: `hash` _must_ be the result of a hash operation for the\n * verification to be secure: it is possible to craft signatures that\n * recover to arbitrary addresses for non-hashed data. A safe way to ensure\n * this is by receiving a hash of the original message (which may otherwise\n * be too long), and then calling {toEthSignedMessageHash} on it.\n */\n function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {\n (address recovered, RecoverError error) = tryRecover(hash, signature);\n _throwError(error);\n return recovered;\n }\n\n /**\n * @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.\n *\n * See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]\n *\n * _Available since v4.3._\n */\n function tryRecover(\n bytes32 hash,\n bytes32 r,\n bytes32 vs\n ) internal pure returns (address, RecoverError) {\n bytes32 s = vs & bytes32(0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff);\n uint8 v = uint8((uint256(vs) >> 255) + 27);\n return tryRecover(hash, v, r, s);\n }\n\n /**\n * @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.\n *\n * _Available since v4.2._\n */\n function recover(\n bytes32 hash,\n bytes32 r,\n bytes32 vs\n ) internal pure returns (address) {\n (address recovered, RecoverError error) = tryRecover(hash, r, vs);\n _throwError(error);\n return recovered;\n }\n\n /**\n * @dev Overload of {ECDSA-tryRecover} that receives the `v`,\n * `r` and `s` signature fields separately.\n *\n * _Available since v4.3._\n */\n function tryRecover(\n bytes32 hash,\n uint8 v,\n bytes32 r,\n bytes32 s\n ) internal pure returns (address, RecoverError) {\n // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature\n // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines\n // the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most\n // signatures from current libraries generate a unique signature with an s-value in the lower half order.\n //\n // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value\n // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or\n // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept\n // these malleable signatures as well.\n if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {\n return (address(0), RecoverError.InvalidSignatureS);\n }\n\n // If the signature is valid (and not malleable), return the signer address\n address signer = ecrecover(hash, v, r, s);\n if (signer == address(0)) {\n return (address(0), RecoverError.InvalidSignature);\n }\n\n return (signer, RecoverError.NoError);\n }\n\n /**\n * @dev Overload of {ECDSA-recover} that receives the `v`,\n * `r` and `s` signature fields separately.\n */\n function recover(\n bytes32 hash,\n uint8 v,\n bytes32 r,\n bytes32 s\n ) internal pure returns (address) {\n (address recovered, RecoverError error) = tryRecover(hash, v, r, s);\n _throwError(error);\n return recovered;\n }\n\n /**\n * @dev Returns an Ethereum Signed Message, created from a `hash`. This\n * produces hash corresponding to the one signed with the\n * https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]\n * JSON-RPC method as part of EIP-191.\n *\n * See {recover}.\n */\n function toEthSignedMessageHash(bytes32 hash) internal pure returns (bytes32) {\n // 32 is the length in bytes of hash,\n // enforced by the type signature above\n return keccak256(abi.encodePacked(\"\\x19Ethereum Signed Message:\\n32\", hash));\n }\n\n /**\n * @dev Returns an Ethereum Signed Message, created from `s`. This\n * produces hash corresponding to the one signed with the\n * https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]\n * JSON-RPC method as part of EIP-191.\n *\n * See {recover}.\n */\n function toEthSignedMessageHash(bytes memory s) internal pure returns (bytes32) {\n return keccak256(abi.encodePacked(\"\\x19Ethereum Signed Message:\\n\", Strings.toString(s.length), s));\n }\n\n /**\n * @dev Returns an Ethereum Signed Typed Data, created from a\n * `domainSeparator` and a `structHash`. This produces hash corresponding\n * to the one signed with the\n * https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`]\n * JSON-RPC method as part of EIP-712.\n *\n * See {recover}.\n */\n function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32) {\n return keccak256(abi.encodePacked(\"\\x19\\x01\", domainSeparator, structHash));\n }\n}\n" }, "@openzeppelin/contracts/token/ERC20/extensions/draft-IERC20Permit.sol": { "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/draft-IERC20Permit.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in\n * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].\n *\n * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by\n * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't\n * need to send a transaction, and thus is not required to hold Ether at all.\n */\ninterface IERC20Permit {\n /**\n * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,\n * given ``owner``'s signed approval.\n *\n * IMPORTANT: The same issues {IERC20-approve} has related to transaction\n * ordering also apply here.\n *\n * Emits an {Approval} event.\n *\n * Requirements:\n *\n * - `spender` cannot be the zero address.\n * - `deadline` must be a timestamp in the future.\n * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`\n * over the EIP712-formatted function arguments.\n * - the signature must use ``owner``'s current nonce (see {nonces}).\n *\n * For more information on the signature format, see the\n * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP\n * section].\n */\n function permit(\n address owner,\n address spender,\n uint256 value,\n uint256 deadline,\n uint8 v,\n bytes32 r,\n bytes32 s\n ) external;\n\n /**\n * @dev Returns the current nonce for `owner`. This value must be\n * included whenever a signature is generated for {permit}.\n *\n * Every successful call to {permit} increases ``owner``'s nonce by one. This\n * prevents a signature from being used multiple times.\n */\n function nonces(address owner) external view returns (uint256);\n\n /**\n * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.\n */\n // solhint-disable-next-line func-name-mixedcase\n function DOMAIN_SEPARATOR() external view returns (bytes32);\n}\n" }, "@openzeppelin/contracts/utils/cryptography/EIP712.sol": { "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.8.0) (utils/cryptography/EIP712.sol)\n\npragma solidity ^0.8.0;\n\nimport \"./ECDSA.sol\";\n\n/**\n * @dev https://eips.ethereum.org/EIPS/eip-712[EIP 712] is a standard for hashing and signing of typed structured data.\n *\n * The encoding specified in the EIP is very generic, and such a generic implementation in Solidity is not feasible,\n * thus this contract does not implement the encoding itself. Protocols need to implement the type-specific encoding\n * they need in their contracts using a combination of `abi.encode` and `keccak256`.\n *\n * This contract implements the EIP 712 domain separator ({_domainSeparatorV4}) that is used as part of the encoding\n * scheme, and the final step of the encoding to obtain the message digest that is then signed via ECDSA\n * ({_hashTypedDataV4}).\n *\n * The implementation of the domain separator was designed to be as efficient as possible while still properly updating\n * the chain id to protect against replay attacks on an eventual fork of the chain.\n *\n * NOTE: This contract implements the version of the encoding known as \"v4\", as implemented by the JSON RPC method\n * https://docs.metamask.io/guide/signing-data.html[`eth_signTypedDataV4` in MetaMask].\n *\n * _Available since v3.4._\n */\nabstract contract EIP712 {\n /* solhint-disable var-name-mixedcase */\n // Cache the domain separator as an immutable value, but also store the chain id that it corresponds to, in order to\n // invalidate the cached domain separator if the chain id changes.\n bytes32 private immutable _CACHED_DOMAIN_SEPARATOR;\n uint256 private immutable _CACHED_CHAIN_ID;\n address private immutable _CACHED_THIS;\n\n bytes32 private immutable _HASHED_NAME;\n bytes32 private immutable _HASHED_VERSION;\n bytes32 private immutable _TYPE_HASH;\n\n /* solhint-enable var-name-mixedcase */\n\n /**\n * @dev Initializes the domain separator and parameter caches.\n *\n * The meaning of `name` and `version` is specified in\n * https://eips.ethereum.org/EIPS/eip-712#definition-of-domainseparator[EIP 712]:\n *\n * - `name`: the user readable name of the signing domain, i.e. the name of the DApp or the protocol.\n * - `version`: the current major version of the signing domain.\n *\n * NOTE: These parameters cannot be changed except through a xref:learn::upgrading-smart-contracts.adoc[smart\n * contract upgrade].\n */\n constructor(string memory name, string memory version) {\n bytes32 hashedName = keccak256(bytes(name));\n bytes32 hashedVersion = keccak256(bytes(version));\n bytes32 typeHash = keccak256(\n \"EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)\"\n );\n _HASHED_NAME = hashedName;\n _HASHED_VERSION = hashedVersion;\n _CACHED_CHAIN_ID = block.chainid;\n _CACHED_DOMAIN_SEPARATOR = _buildDomainSeparator(typeHash, hashedName, hashedVersion);\n _CACHED_THIS = address(this);\n _TYPE_HASH = typeHash;\n }\n\n /**\n * @dev Returns the domain separator for the current chain.\n */\n function _domainSeparatorV4() internal view returns (bytes32) {\n if (address(this) == _CACHED_THIS && block.chainid == _CACHED_CHAIN_ID) {\n return _CACHED_DOMAIN_SEPARATOR;\n } else {\n return _buildDomainSeparator(_TYPE_HASH, _HASHED_NAME, _HASHED_VERSION);\n }\n }\n\n function _buildDomainSeparator(\n bytes32 typeHash,\n bytes32 nameHash,\n bytes32 versionHash\n ) private view returns (bytes32) {\n return keccak256(abi.encode(typeHash, nameHash, versionHash, block.chainid, address(this)));\n }\n\n /**\n * @dev Given an already https://eips.ethereum.org/EIPS/eip-712#definition-of-hashstruct[hashed struct], this\n * function returns the hash of the fully encoded EIP712 message for this domain.\n *\n * This hash can be used together with {ECDSA-recover} to obtain the signer of a message. For example:\n *\n * ```solidity\n * bytes32 digest = _hashTypedDataV4(keccak256(abi.encode(\n * keccak256(\"Mail(address to,string contents)\"),\n * mailTo,\n * keccak256(bytes(mailContents))\n * )));\n * address signer = ECDSA.recover(digest, signature);\n * ```\n */\n function _hashTypedDataV4(bytes32 structHash) internal view virtual returns (bytes32) {\n return ECDSA.toTypedDataHash(_domainSeparatorV4(), structHash);\n }\n}\n" }, "@openzeppelin/contracts/utils/Counters.sol": { "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (utils/Counters.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @title Counters\n * @author Matt Condon (@shrugs)\n * @dev Provides counters that can only be incremented, decremented or reset. This can be used e.g. to track the number\n * of elements in a mapping, issuing ERC721 ids, or counting request ids.\n *\n * Include with `using Counters for Counters.Counter;`\n */\nlibrary Counters {\n struct Counter {\n // This variable should never be directly accessed by users of the library: interactions must be restricted to\n // the library's function. As of Solidity v0.5.2, this cannot be enforced, though there is a proposal to add\n // this feature: see https://github.com/ethereum/solidity/issues/4637\n uint256 _value; // default: 0\n }\n\n function current(Counter storage counter) internal view returns (uint256) {\n return counter._value;\n }\n\n function increment(Counter storage counter) internal {\n unchecked {\n counter._value += 1;\n }\n }\n\n function decrement(Counter storage counter) internal {\n uint256 value = counter._value;\n require(value > 0, \"Counter: decrement overflow\");\n unchecked {\n counter._value = value - 1;\n }\n }\n\n function reset(Counter storage counter) internal {\n counter._value = 0;\n }\n}\n" }, "@openzeppelin/contracts/token/ERC20/IERC20.sol": { "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)\n\npragma solidity ^0.8.0;\n\n/**\n * @dev Interface of the ERC20 standard as defined in the EIP.\n */\ninterface IERC20 {\n /**\n * @dev Emitted when `value` tokens are moved from one account (`from`) to\n * another (`to`).\n *\n * Note that `value` may be zero.\n */\n event Transfer(address indexed from, address indexed to, uint256 value);\n\n /**\n * @dev Emitted when the allowance of a `spender` for an `owner` is set by\n * a call to {approve}. `value` is the new allowance.\n */\n event Approval(address indexed owner, address indexed spender, uint256 value);\n\n /**\n * @dev Returns the amount of tokens in existence.\n */\n function totalSupply() external view returns (uint256);\n\n /**\n * @dev Returns the amount of tokens owned by `account`.\n */\n function balanceOf(address account) external view returns (uint256);\n\n /**\n * @dev Moves `amount` tokens from the caller's account to `to`.\n *\n * Returns a boolean value indicating whether the operation succeeded.\n *\n * Emits a {Transfer} event.\n */\n function transfer(address to, uint256 amount) external returns (bool);\n\n /**\n * @dev Returns the remaining number of tokens that `spender` will be\n * allowed to spend on behalf of `owner` through {transferFrom}. This is\n * zero by default.\n *\n * This value changes when {approve} or {transferFrom} are called.\n */\n function allowance(address owner, address spender) external view returns (uint256);\n\n /**\n * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.\n *\n * Returns a boolean value indicating whether the operation succeeded.\n *\n * IMPORTANT: Beware that changing an allowance with this method brings the risk\n * that someone may use both the old and the new allowance by unfortunate\n * transaction ordering. One possible solution to mitigate this race\n * condition is to first reduce the spender's allowance to 0 and set the\n * desired value afterwards:\n * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729\n *\n * Emits an {Approval} event.\n */\n function approve(address spender, uint256 amount) external returns (bool);\n\n /**\n * @dev Moves `amount` tokens from `from` to `to` using the\n * allowance mechanism. `amount` is then deducted from the caller's\n * allowance.\n *\n * Returns a boolean value indicating whether the operation succeeded.\n *\n * Emits a {Transfer} event.\n */\n function transferFrom(\n address from,\n address to,\n uint256 amount\n ) external returns (bool);\n}\n" }, "@openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol": { "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)\n\npragma solidity ^0.8.0;\n\nimport \"../IERC20.sol\";\n\n/**\n * @dev Interface for the optional metadata functions from the ERC20 standard.\n *\n * _Available since v4.1._\n */\ninterface IERC20Metadata is IERC20 {\n /**\n * @dev Returns the name of the token.\n */\n function name() external view returns (string memory);\n\n /**\n * @dev Returns the symbol of the token.\n */\n function symbol() external view returns (string memory);\n\n /**\n * @dev Returns the decimals places of the token.\n */\n function decimals() external view returns (uint8);\n}\n" }, "@openzeppelin/contracts/utils/Strings.sol": { "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v4.8.0) (utils/Strings.sol)\n\npragma solidity ^0.8.0;\n\nimport \"./math/Math.sol\";\n\n/**\n * @dev String operations.\n */\nlibrary Strings {\n bytes16 private constant _SYMBOLS = \"0123456789abcdef\";\n uint8 private constant _ADDRESS_LENGTH = 20;\n\n /**\n * @dev Converts a `uint256` to its ASCII `string` decimal representation.\n */\n function toString(uint256 value) internal pure returns (string memory) {\n unchecked {\n uint256 length = Math.log10(value) + 1;\n string memory buffer = new string(length);\n uint256 ptr;\n /// @solidity memory-safe-assembly\n assembly {\n ptr := add(buffer, add(32, length))\n }\n while (true) {\n ptr--;\n /// @solidity memory-safe-assembly\n assembly {\n mstore8(ptr, byte(mod(value, 10), _SYMBOLS))\n }\n value /= 10;\n if (value == 0) break;\n }\n return buffer;\n }\n }\n\n /**\n * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.\n */\n function toHexString(uint256 value) internal pure returns (string memory) {\n unchecked {\n return toHexString(value, Math.log256(value) + 1);\n }\n }\n\n /**\n * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.\n */\n function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {\n bytes memory buffer = new bytes(2 * length + 2);\n buffer[0] = \"0\";\n buffer[1] = \"x\";\n for (uint256 i = 2 * length + 1; i > 1; --i) {\n buffer[i] = _SYMBOLS[value & 0xf];\n value >>= 4;\n }\n require(value == 0, \"Strings: hex length insufficient\");\n return string(buffer);\n }\n\n /**\n * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.\n */\n function toHexString(address addr) internal pure returns (string memory) {\n return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);\n }\n}\n" } }, "settings": { "metadata": { "bytecodeHash": "none" }, "optimizer": { "enabled": true, "runs": 800 }, "outputSelection": { "*": { "*": [ "evm.bytecode", "evm.deployedBytecode", "devdoc", "userdoc", "metadata", "abi" ] } }, "libraries": {} } }}

Blur

Start building on QuickNode

Source code: